| Cutting Thickness Capacity | 200mm with 1 Torch 150mm with 2 Torches 100mm with 3 Torches 50mm with 4 Torches
| Cutting Surface Shape | Square Cutting (I-shape)
| Straight Line Cutting | Possible when four direction switch is used without energising tracer head, machine will strip, (parallel out) in any of the four pre-selected directions.
| Automatic Lead-in | Possible in four directions
| Cutting Speed | 100 ~ 3000mm/min
| Tracer System | Linatrol HL-93 Tracing System
| Drive | Co-Ordinate drive by X and Y drive motors
| Tracing | Circle Scanning Edge Tracing
| Line Width | 0.6mm and wider. Silhouette drawing is permissible.
| Kerf Compensation | +/- 1.5mm
| Tracing Accuracy | +/- 0.15mm deviation from edge of line on straight line.
| Position of Control Assembly | Left side of machine when facing it
| Travel of the Machine | Roller friction travel controlled by DC servo motor with reduction gear.
| Cutting Oxygen | ON/OFF operations are performed by solenoid valves.
| Cutting Oxygen Emergency Shut-off Solenoid Valve | Works on any emergency, linking with tracer.
| Power Source | Single Phase, AC 110 / 240 Volts 50Hz / 60Hz. | | | | | | | | | | | | | | | |
Compact.jpg)