Tracing Range

Width

Length

1500mm

1000mm

Cutting Range

Stripping Width

Length

2100mm

2500mm

Number of Torches

Maximum of 4

Cutting Thickness Capacity

200mm with 1 Torch

150mm with 2 Torches

100mm with 3 Torches

50mm   with 4 Torches

Cutting Surface Shape

Square Cutting (I-shape)

Straight Line Cutting

Possible when the four direction switch is used without energising tracer head.  Machine will strip (parallel out) in any of the four pre-selected directions.

Automatic Lead-in

Possible in four directions

Cutting Speed

100 - 3000mm/min

Tracer System

Linatrol HL-83 Tracing System

Drive

Co-ordinate drive by X and Y axis drive motors

Tracing

Circle Scanning Edge Tracing

Line Width

0.6mm and wider.  Silhouette drawing is permissible.

Kerf Compensation

+/- 1.5mm

Tracing Accuracy

+/- 0.15mm deviation from edge of line on straight line.

Position of Control Assembly

Left side (when facing machine)

Machine Travel

Roller friction travel controlled by DC servo motor with reduction gearing.

Cutting Oxygen

ON/OFF operations are performed by solenoid valves.

Cutting Oxygen Emergency Shut-off Solenoid Valve

Works on any emergency stop, linking with tracer.

Power Source

Single Phase, AC 110 / 240 Volts 50Hz / 60Hz.

Burny 2.5 Controller

The proven reliable Burny 2.5 provides additional functionality and simplicity to the machine operator.

Cutting Table

Cutting tables starting at 2500mm in length can be provided on request.  See our Cutting Tables for more information.

Extended Length

For applications requiring greater than 2500mm in length, the PCS 1200 can be extended to suit.

Base Model Price

:

From AUD 27,500